'87 Jeep YJ Laredo. Original paint Revised M.O.R.E. shackle reverse and bugggy spring lots of stainless, all hinges 1" body lift 1" lift and moved forward front axle 31x10.50 on Jeep alloys Webber Flowmaster about to get 351fi, 435, 205hd, D30hp, 8.8, 4wdb

'98 Jeep TJ frame shorten frame at front by removing #1 crossmember and replacing with 1x2x18 tube crossmember fabricate motor mount to inclued connection from side to side as #2 crossmember wheelbase 93.4 stretched to 108 wheelbase by inserting 14.1 extension into a cut at the front of the lower rear control arm bracket. replace body mounts with 3 fabricated ones indexed to the top of the frame the third one to extend across the frame as the #3 crossmember '41 Willys Pickup stretched 6" by using coupe doors '37 Chevy PU rear fenders (widened) '51 Willys WO tailgate '41 Willys Fabricated bed '88 Chevy astrovan captians seats mount sectioned 2" '78 Firebird TA tilt column and wheel '93 Dana30 high pinion front axle no disconnect 3.73:1 open carrier '03 WJ knuckles, tierods
'96 Ford 8.8 Explorer 3.73:1, posi, 31 spline, TJ brackets '99 Cobra brake system hydroboost/calipers/rotors/lines etc '96 Cobra 17x8 wheels with 255/45/17 tires alternate
aftermarket Mustang Bullit wheels 17x9 245/45/17 front 17x10.5 315/35/17 rear '63 Corvette 327 +60 early FI heads 2.02/160 ported and polished motor mount '63 Corvette safety (Napa 602-1127) '90 700R4 K V8 case rebuilt Advanced Adapters 700R4 to NV JEEP TRANSFER CASE '98 NV242 transfer case XJ

Replacement Engine
355 or 383 4 bolt B&M blown small block, World heads

Want More Jeepers?